P0014
Camshaft variable timing solenoid failure, Engine oil level is too low, The engine is not timed correctly, The engine oil does not meet the manufacturer's requirements, Variable valve timing actuator failure, Worn timing chain.
- Audi
- Powertrain
- Generic code
How this code is built
- P
- SystemPowertrain
- 0
- Defined bySAE, the same on every car
- 0
- AreaFuel and air metering, auxiliary emission controls
- 14
- FaultThe specific fault in that area
Guide
Writing the guide for P0014. The first open of a code takes up to a minute.
This code for other makes
Nearby codes
- P0013AudiPowertrain Control Module (PCM) failure, Variable valve timing actuator failure, Wiring issue
- P0101AudiLarge vacuum leaks, Split Intake Air Boot or PCV Hose, Defective intake manifold gaskets, Mass Airflow Sensor (MAF), Mass Air Flow Sensor circuit and or wiring problems, Defective Barometric Pressure Sensor, Dirty or contaminated Mass Air Flow Sensing wire or filament, PCM software needs to be updated