P0101
Large vacuum leaks, Split Intake Air Boot or PCV Hose, Defective intake manifold gaskets, Mass Airflow Sensor (MAF), Mass Air Flow Sensor circuit and or wiring problems, Defective Barometric Pressure Sensor, Dirty or contaminated Mass Air Flow Sensing wire or filament, PCM software needs to be updated.
- Audi
- Powertrain
- Generic code
How this code is built
- P
- SystemPowertrain
- 0
- Defined bySAE, the same on every car
- 1
- AreaFuel and air metering
- 01
- FaultThe specific fault in that area
Guide
Writing the guide for P0101. The first open of a code takes up to a minute.
This code for other makes
Nearby codes
- P0014AudiCamshaft variable timing solenoid failure, Engine oil level is too low, The engine is not timed correctly, The engine oil does not meet the manufacturer's requirements, Variable valve timing actuator failure, Worn timing chain
- P0102AudiThe Mass Airflow Sensor (MAF) Sensor is unplugged or the wiring is damaged, Loose or corroded electrical terminals in the MAF Sensor circuit, Faulty MAF Sensor